Product ID:A COMPONENTS FOR FROTH PAK 12 KIT, PART A
MSDS Date:04/01/1986
FSC:8040
NIIN:00N012036
Kit Part:Y
MSDS Number: BJMTM

INSTA-FOAM PRODUCTS INC

1500 CEDARWOOD DR
JOLIET, IL 60435
US

Emergency Phone: 815-741-6800 EXT 56

Info Phone: 800-435-9359; 815-741-6800

Preparer: R. BRAUN

Cage: 54577

INSTA-FOAM PRODUCTS INC

JOLIET, IL 60435 US

Telephone: 815-741-6800

Cage: 54577

METHYLENE BISPHENYL ISOCYANATE (MDI) (SARA III)

CAS: 101-68-8

RTECS: NQ9350000

Fraction By Weight: >50%

OSHA PEL C, 0.02 PPM

ACGIH TLV: 0.005 PPM; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

HIGHER OLIGOMERS OF MDI (POLY METHYLENE POLYPHENYLENE

CAS: 9016-87-9

RTECS: TR0350000

Fraction By Weight: <50%

HALOGENATED HYDROCARBON

Fraction By Weight: <20%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:CAN LEAD TO IRRIT OF MUC MEMB,
TIGHTNESS OF CHEST, RESP TRACT, COUGHING, HDCH, SHORTNESS OF
BRTH.MAY LEAD TO AN ALLERGIC SENSIT W/ASTHMA LIKE SYMPS. EXTEN
EXPOS TO CONC WELL ABOVE TLV COULD LEAD TO BRONCHITIS,BRONCHIAL
SPASM & PULMONARY EDEMA. EFFECTS ARE USUALLY REVERSIBLE. (SEE EFTS
OF OVEREXPOS)
Effects of Overexposure:PEOPLE W/CARD ARRHYTHMIA MAY BE AT INCR RISK IN
SEV EXPOS. SKIN:MIX CAUSES LOCALIZED IRRIT & DISCOLORATION. PRLNG
CONT COULD PRDCE REDDENING,SWELLING/BLISTERING AND IN SOME
INDIVIDUALS,SENSIT & DERMAT . EYE:LIQ,VAP/AEROSOL IS IRRIT TO EYE.
CORNEAL DAMAGE CAN OCCUR; INDIC ARE THAT DAMAGE IS REVERSIBLE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: FLUSH W/ H*2O 15 MIN. OBTAIN MED ATTN. SKIN: REMOVE
CONTAM CLTH. WASH THORO W/ SOAP & H*2O. WASH CLTH BEFORE REUSE.
INHAL: MOVE TO FRESH AIR & ADMINISTER O*2 IF NEC. IF NOT BRTH, GIVE
ARTF RESP. OBTAIN MED ATTN. INGEST: IMMED DILUTE BY GIVING 1-2
GLASSES OF WATER. INDUCE VOMIT BY TOUCHING THE BACK OF THE TONGUE.
OBTAIN MED ATTN.

Flash Point Method:PMCC
Flash Point:390F (199C)
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, HIGH EXPANSION
CHEMICAL FOAM, LARGE QUANTITY WATER SPRAY FOR LARGE FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . EXPLOSIVE RUPTURE IS POSSIBLE. THEREFORE,
USE COLD WATER TO COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION PRODUCTS MAY
INCLUDE FLUORIDES, CHLORIDES AND PHOSGENE .

Spill Release Procedures:PROVIDE VENT, ISOLATE AREA. ABSORB THE "B"
COMPONENT SPILL WITH SAWDUST OR VERMICULITE AND COLLECT IN SUITABLE
CONTAINERS. WASH REMAINING RESIDUE FROM SURFACE WITH SOAP AND
WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:FOR LONGEST SHELF LIFE, AVOID STORAGE
ABOVE 90F. SHORT TERM STORAGE BETWEEN 40F AND 60F WILL NOT HARM THE
MATL. IDEAL STORAGE IS 60F TO 90F.
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN GENERAL
VICINITY OF ARC WELDING, OPEN FLAMES OR HOT SURFACES. HEAT AND/OR
UV RADIATION MAY CAUSE FORMATION OF CHLORIDES, FLUORIDES OR
PHOSGENE .

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:CHEMICAL RESISTANT RUBBER/PLASTIC.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:USE WITH ADEQUATE VENTILATION, SAFETY GOGGLES,
LONG SLEEVE WORK CLOTHES, CHEMICAL RESISTANT RUBBER OR PLASTIC
GLOVES.
Supplemental Safety and Health
CHLOROCARBON/CHLOROFLUOROCARBON (CFC) MATLS HAVE PRDCE SENSIT OF
MYOCARDIUM TO EPINEPHRINE IN LAB ANIMALS AND COULD HAVE A SIMILAR
EFFECT IN HUMANS. ADRENOMIMETRICS (I.E., EPINEPHRINE) MAY BE
CONTRA-I NDICATED EXCEPT FOR LIFE-SUSTAINING USES IN HUMANS ACUTELY
OR CHRONICALLY EXPOSED TO CHLOROCARBONS OR CFC'S .

Boiling Pt:B.P. Text:406F,208C
Vapor Pres:2700
Vapor Density:8.5(MDI)
Spec Gravity:1.3
Solubility in Water:SLOWLY
Appearance and Odor:DARK BROWN, MILD FLUOROCARBON ODOR,FROTHY LIQ UPON
RELS FROM THE CYLINDER.
Percent Volatiles by Volume:<20%

Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOL, STRONG BASES AND METAL COMPOUNDS.
Stability Condition to Avoid:STORAGE TEMPERATURE ABOVE 120F OR BELOW
32F CAN CAUSE RUPTURE
Hazardous Decomposition Products:CHLORIDES,FLUORIDES,PHOSGENE .CO,
OXIDES OF NITROGEN, TRACES OF HCN,MDI.REACTS SLOWLY W/H*2O TO
LIBERATE CO*2.
Conditions to Avoid Polymerization:MAY OCCUR IF IN CONT W/ MOISTURE OR
OTHER MATL THAT REACT W/ ISOCYANATE. MAY OCCUR AT TEMP OVER 400F
(204C).

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE AND LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.